2970 manual

RCIDX DX Series. Owners Manual. RCI Base. Owners Manual. RCIDX Series. Owners Manual. RCI Series. Owners Manual. TRCP. manual mode by pressing the MAN key. NOTE: FM repeaters may require that a sub-audible CTCSS tone be transmitted to gain access to the repeater. The RClN2 can be equipped with an optional CTCSS encoder. TO PROGRAM TX OFFSET. 1 Press the PRG (Program) key. 2. Press the SPLIT key. The LCD display will indicate with PRG and. Dell™ PowerEdge™ Systems Hardware Owner’s Manual. Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the.

RCI DX CHAPTER 2 INTRODUCTION INTRODUCTION The Ranger RCI DX / RCI DX is a solid-state, fully synthesized Amateur 10 and 12 meter dual band mobile transceiver with full band coverage from MHz to MHz and MHz to MHz and all mode operation, including: AM, FM, USB, LSB, CW and PA modes. RCI mods? by John» Thu, Well, I now have had 2 Both put out 8W Average power. That is a. 20% decrease from the advertised power of 10W on AM. That would equate. to 80W for the , compensating for marketing hype. Anyway, the radio. You can order printed copies of some of the manuals from the www.doorway.ru sites and from the telephone numbers listed in the "Obtaining Documentation" section. For translations of the warnings that appear in this publication, see the Regulatory Compliance and Safety Information for the Catalyst Switch that accompanies this guide.

This section explains the basic programming procedures for the RCI/ amateur 10 meter mobile transceiver. FREQUENCY SELECTION Frequency selection in the RCI/ can be accomplished using three of the following methods: 1. The first method of frequency selection is through the use of the (Shift) key and the and arrows. Dell™ PowerEdge™ Systems Hardware Owner’s Manual. Notes, Notices, and Cautions. manual mode by pressing the MAN key. NOTE: FM repeaters may require that a sub-audible CTCSS tone be transmitted to gain access to the repeater. The RClN2 can be equipped with an optional CTCSS encoder. TO PROGRAM TX OFFSET. 1 Press the PRG (Program) key. 2. Press the SPLIT key. The LCD display will indicate with PRG and.